MULTICRAB - TECHNICAL INFORMATION - 2023 86 ASSEMBLY AND DISTRIBUTION OF DECKS ASSEMBLING STEEL DECKS - PANACIER ASSEMBLING MIXED ACCESS DECKS - PANATRAP Class 5 (450 daN/m²), 2.50 m long The aluminium/wood access deck is easily installed thanks to its optimised weight and its ergonomic handles allowing for easy handling of the deck. PANATRAP is assembled in the same way as the steel deck. Our PANATRAPs are equipped with gravity nails to prevent deck uplift and maintain it perfectly. The steel deck is easily installed in the structure thanks to its optimised size and its ergonomic handles allowing for easy handling of the deck. PANACIER is assembled by inserting the deck into the desired grid so that the latter is above the loadbearing ledgers. Lower the deck in order to position the hooks on the load-bearing ledgers. Our 0.20 m PANACIERs are equipped with gravity nails to prevent uplift and the maintaining of the deck. Our 0.30 m PANACIERs are equipped with gravity nails to take up the uplift as well as an anti-tilt device. Class 6 (600 daN/m²), 2.50 m long The gravity nail must be installed immediately after assembly and this, until dismantling. The gravity nail must be installed immediately after assembly and this, until dismantling. •If the working load of the deck is higher than the operating load of the PANATRAPs, the access has to be assembled via locking. RECOMMENDATION •Allow at least one access per façade. •Allow a maximum distance of 20 m between two access points.
RkJQdWJsaXNoZXIy OTQ2MzM=