MULTICRAB - TECHNICAL INFORMATION - 2023 68 SUPPLEMENTAL EQUIPMENT - CRABÉTAI RANGE UPRIGHTS CRABÉTAI uprights Part number Description Weight in kg 270100- 1 Base 4.00 270101- 9 1.00 m CRABÉTAI upright 5.56 270105- 0 1.50 m CRABÉTAI upright 7.50 270102- 7 2.00 m CRABÉTAI upright 10.59 270103- 5 3.00 m CRABÉTAI upright 14.87 270135- 7 3.50 m CRABÉTAI upright 18.00 270050- 8 3.50 standard spigot junction basic standard 1.37 270009- 4 S pin 0.20 Ø 57 mm CRABÉTAI uprights can be used on the lower part of Ø 49 mm MULTICRAB scaffolding to reinforce the lower part of tall structures or structures bearing heavy loads. They comprise a Ø 57 mm tube on which four stirrups are welded at 90° every 0.50 m. One end is fitted with a sleeve to centre the uprights and prevent any dislocation. All the articles in the CRABÉTAI range can be found in the ''FALSEWORK'' part. INFO COMPOSITION OF THE CRABÉTAI - MULTICRAB STANDARDS 1 2 3 4 Adjustable baseplate 40/49 Adjustable baseplate 40/49 if necessary Adjustable baseplate 50/60 Adjustable baseplate 50/60 CRABÉTAI base CRABÉTAI baseplate 2.00 m CRABÉTAI upright 2.00 m CRABÉTAI upright 2.00 m CRABÉTAI upright 2.00 m CRABÉTAI upright 2.00 m CRABÉTAI upright CRABÉTAI base bolted to the CRABÉTAI upright 2.00 m MULTICRAB upright INVERTED (spigot downwards) 3.50 m CRABÉTAI upright on basic standard 2.00 m MULTICRAB upright NOT INVERTED (spigot upwards) 1 2 3 4 The Crabétai base is doubled with a Ø 49 mm tube. It lets you use 40/49 MULTICRAB adjustable baseplates. The CRABÉTAI baseplate can also be used to link adjustable baseplates 40/49. The CRABÉTAI base or the “3.50 m uprights on basic standard” allow the two systems to be combined. If a “3.50 m upright on basic standard” is used, an 50/60 adjustable baseplate is imperative. CRABÉTAI uprights are used with wooden toe boards. The junction spigot is used to connect the 3.50 m CRABÉTAI uprights on basic standard between them.
RkJQdWJsaXNoZXIy OTQ2MzM=