MULTICRAB - TECHNICAL INFORMATION - 2023 52 CATALOGUE OF MULTICRAB PARTS - FAÇADE APPLICATION BASIC STANDARDS Basic standards Part number Description Weight in kg 240000- 0 Basic standard 2.53 250104- 7 Basic standard with fixed plate 4.28 UPRIGHTS 50 cm 8.5 Used to limit the height between the first ledger and the ground support. It facilitates placement and reduces the height of the extended base. First adjust the extension of the base to be able to bolt the basic standard to the upright whenever necessary. MULTICRAB uprights are comprised of a tube Ø 48.3 x 2.7 mm nominal thickness (σe = 32 daN/mm2) on which nodes of stirrups are welded every 0.50 m. A spigot protruding by 18 cm centres the standards and prevents any dislocation. The spigot has a geometrical deformation in order to reduce clearances during the creation of a standard. 18 25 cm Uprights Part number Description Weight in kg 253027- 7 0.27 m end section 1.50 250100- 5 0.50 m upright 3.09 290100- 7 0.50 m upright without spigot 2.41 250101- 3 1.00 m upright 5.32 251101- 2 1.00m upright without spigot 4.23 250102- 1 2.00 m upright 9.59 250103- 9 3.00 m upright 12.66 300009- 8 S pin 0.08 206034- 1 Bolt Ø10/60 quality 6-8 0.06 207042- 3 Bolt Ø10/70 quality 6-8 0.07 1 2 3 4 5 1 2 3 5 4 Uprights can be pinned or bolted together. Assembly: bolt the uprights together at the start of assembly (before the installation of the ledgers and diagonal braces). INFO mm The use of pins or bolts is recommended for anchored structures when the standards are subject to tensile forces. Double bolting of the standards is required for suspended ones, craned structures, self-supporting, umbrella runs and public structures.
RkJQdWJsaXNoZXIy OTQ2MzM=