ACCESS STAIRCASES - TECHNICAL INFORMATION - 2023 174 ASSEMBLY INSTRUCTIONS HÉLICRAB EXITS ARE POSSIBLE AFTER A 3 STEP FLIGHT Staircase attached to building. Straight exit. Staircase attached to building. Side exit. Staircase attached to building. Straight exit. Staircase attached to building. Wide straight exit with two Panangles on 0.70 m ledgers and stirrup rings. Guardrail using 1.00 m ledgers. Staircase separated from the building. Exit via a gangway. •Follow the assembly until step 5 of the preceding assembly instructions. •Fit the uprights and ledgers. •Fit the 2.45 m diagonal braces on the outside and the 1.72 m diagonal braces on the outside. •Fit the flights and the 1.00 m upright at the exit complying with the instructions of the preceding step 9. •Fit the guardrail upright, angling it so that the lowest stirrup is on the outside. •Fit the 0.70 m SAD guardrail and lock it with the 0.70 m ledger. •Fit the 0.70 m Panangle and toe board. •Fit the 0.27 m end section and the 1.72 m diagonal brace as a guardrail. •Continue assembly from step 11 of the preceding instructions. 6’ 7’ Staircase attached to building. Side exit on brackets or cantilever. Staircase attached to building with steps down to the slab. Compatible with Crab steel staircase for the descent. EXITS ARE POSSIBLE AFTER A 2 STEP FLIGHT ASSEMBLY INSTRUCTIONS Our design offices will be delighted to help you with any technical questions. INFORMATION These examples of HÉLICRAB configurations are just a tiny fraction of the many possibilities.
RkJQdWJsaXNoZXIy OTQ2MzM=