MULTICRAB - TECHNICAL INFORMATION - 2023 108 CIRCULAR SCAFFOLDING ASSEMBLY INSTRUCTIONS •Place and lay the adjustable baseplates on the distribution wedges. •Interlock the basic standards. •Fit the ledgers of the straight sections and the 1.50 m ledgers in the inter-sections on the outside. 1 2 3 4 •Assemble the tubes and couplers on the inside, giving the required diameter. •Level. •Tighten the couplers on the basic standards. • Lay the first assembly deck. •Construct the complete deck in the access grid. •Fit the uprights and diagonal braces (3.00 m uprights on the outside). •AT 2.00 m, fit the ledgers and tubes, except the outer ledgers with straight sections that lock in place the SAD safety guardrails. •Fit and lock the SAD safety guardrails. • Fit the "No entry" sign. •After opening the trapdoor and before accessing the upper deck, attach yourself to the stirrup located 1.00 m above the deck. •Secure movement by attaching the 2nd tether to the 1.00 m guardrail above the deck, then remove the hook from the 1st tether. •Fit the guardrails between Inter-sections (1.50 m ledgers) and the toe boards. 6 To be able to level it, tighten the couplers ONLY on the tubes. •Attaching the personal protective equipment. •One of the two hooks of the fall prevention system must constantly be attached (except when accessing the upper floor). 5 •From this level, lay the deck and the VARIOPANS in all the grid sections of the upper level. The QR code lets you directly access the online assembly video on your mobile.
RkJQdWJsaXNoZXIy OTQ2MzM=