MULTICRAB - TECHNICAL INFORMATION - 2023 102 ROOFER PROTECTION ASSEMBLY INSTRUCTIONS To protect themselves against falling from heights, carpenters, roofers and zinc workers used to erect fan-shaped scaffolding with wooden elements. Most of the time these structures were unjustified by the calculations. The Ministry for Employment, Social Cohesion and Housing decided to impose a ban on such fixtures from 1 October 2007 (circular dated 13 July 2006 from the official bulletin). Entrepose Échafaudages offers solutions ensuring this protection with its range of multidirectional scaffolding equipment and special equipment for roofers. • Put in place one anchor point under the deck per row of standards. •Raise the last SAD safety guardrail by fitting the 0.27 m end section, to allow the safety guard to be fixed. 1 2 3 •Put in place joining pins of the standards. •Fit the toe boards. •Put in place the protective net or wire netting. •Check that scaffolding complies with the plan. Whenever necessary, roofer protection can be created using independent towers linked by a gangway at the top. In that case, it is essential to first define safe assembly procedures, more particularly to create cantilevers. BRIDGING SCAFFOLDING •The system we offer has been justified and laboratory-tested by CEBTP. INFORMATION •Product meets the requirements of the European standards. To ensure safe assembly, periodic checks of compliance of the structure and the firmness of the anchors (in accordance with the ministerial order of 21/12/04), we recommend you equip the scaffolding entirely with assembly and work decks and guardrails.
RkJQdWJsaXNoZXIy OTQ2MzM=